P.D. believes that there are three demands on a shaft when onshore fishing.
It must be a shaft of light nimble design with both resilience and flexibility from the Belly to the Tip for casting
and have assured power at the Bat for battling.

So, we need a rod that when casting we can confidently control the lure and due to the nimbleness of the tip,
accurately cast long distance with ease.
It must be a rod that is limber and light but deliver huge bat power and control even when under pressure.
To be light the tapered design must provide balance.

Design Balance of the blank is hugely important.
Too big and lots of resin will make it too heavy while too small and too little resin will be light but weak.
Designing a blank that is small and light and uses a minimal amount of resin yet has a very high point of maximum extension
is extremely important.

P.D.s
Grand Cross shore series shafts have achieved an extraordinary balance between remarkably low weight and
awesome strength. With careful selection of the best materials, matchless resin control and the tapered design the master rod
maker has produced something special: The unmatchable Hyper shaft.

With these no nonsense, High torque taper design shafts, Anglers can enjoy stress free casting.
To enable the Angler to control the lure as he pleases the guides and parts are exquisitely set to the shaft.

The Blue Runner (yellow tail, king fish) then the Red Bass and Sea Bass models will all be released successively.


*1) Tips of the Grand Cross Shore series are manufactured of Low Resin Carbon Graphite material.
To maintain and protect the blanks strength after baking we do not polish the Micro pitch tape residue off the carbon graphite part.
*2) The bat section is manufactured using P.D.s original Aramid Kevlar fiber producing incredible torque.




MODEL length Action Lure wt Line wt section TARGET Power Material PRICE
OVER RANGE 98L 9'8" Moderate Plug max:30g
Jig max:60g
PE ~ #2.5 2pcs Monster seabass
Red Bass
2 Low Resin Carbon
+Aramid kevlar
JPY 56000-
【Setting GUIDE】

Top Guide

#2 Guide

#3 Guide

#4 Guide

#5 Guide

#6 Guide

#7 Guide

#8 Guide

#9 Guide

Guide qty

T- MNST #8 T-KTSG#8 T-KTSG#8 T-KTSG#8 T-KTSG#10 T-KLSG#12 T-KLSG#16 T-KLSG#20 T-KWSG#30 9
【Setting Material】Grip(EVA) Front=160mm / Rear=410mm (End of Reel sheet from End of Butt cap)
        Reel Seat= FK-7 DPS 18【Non-slip Coating screw】


MODEL length Action Lure wt Line wt section TARGET Power Material PRICE
OVER RANGE 98M
“Set-up #8 Single”
9'8" Moderate Plug max:50g
Jig max:80g
PE ~ #3 2pcs Yellow tail
Red Bass
3 Low Resin Carbon
+Aramid kevlar
JPY 57000-
【Setting GUIDE】

Top Guide

#2 Guide

#3 Guide

#4 Guide

#5 Guide

#6 Guide

#7 Guide

#8 Guide

#9 Guide

Guide qty

T- MNST #8 T-KTSG#8 T-KTSG#8 T-KTSG#8 T-KTSG#10 T-KLSG#12 T-KLSG#16 T-KLSG#20 T-KWSG#30 9
【Setting Material】Grip(EVA) Front=160mm / Rear=420mm (End of Reel sheet from End of Butt cap)
        Reel Seat= FK-7 DPS 18【Non-slip Coating screw】


MODEL length Action Lure wt Line wt section TARGET Power Material PRICE
OVER RANGE 98M
“Set-up #10 Double”
9'8" Moderate Plug max:50g
Jig max:80g
PE ~ #3 2pcs Yellow tail
Red Bass
3 Low Resin Carbon
+Aramid kevlar
JPY 57500-
【Setting GUIDE】

Top Guide

#2 Guide

#3 Guide

#4 Guide

#5 Guide

#6 Guide

#7 Guide

#8 Guide

#9 Guide

Guide qty

T- MNST #10 T-LNSG#10 T-LNSG#10 T-LNSG#10 T-LNSG#12 T-KWSG#16 T-KWSG#20 T-KWSG#30 8
【Setting Material】Grip(EVA) Front=160mm / Rear=420mm (End of Reel sheet from End of Butt cap)
        Reel Seat= FK-7 DPS 18【Non-slip Coating screw】


MODEL length Action Lure wt Line wt section TARGET Power Material PRICE
OVER RANGE 98H 9'8" Moderate Plug max:70g
Jig max:100g
PE ~ #4 2pcs Yellow tail
Big Red Bass
4 Low Resin Carbon
+Aramid kevlar
JPY 59000-
【Setting GUIDE】

Top Guide

#2 Guide

#3 Guide

#4 Guide

#5 Guide

#6 Guide

#7 Guide

#8 Guide

#9 Guide

Guide qty

T- MNST #10 T-LNSG#10 T-LNSG#10 T-LNSG#10 T-LNSG#12 T-KWSG#16 T-KWSG#20 T-KWSG#30 8
【Setting Material】Grip(EVA) Front=160mm / Rear=430mm (End of Reel sheet from End of Butt cap)
        Reel Seat= FK-7 DPS 18【Non-slip Coating screw】




FEATURES Setting Parts Chart ROD SPEC CHART